Boatbuilding Tips and Tricks Blog
Here are the latest few blog posts. The balance of this years, appear below the list of posts and the column on the right, the index, lists all posts since 2008 when I started this blog, over 300 posts and 8 years.
Tuesday, February 7, 2017
The builder, Vic Bottomly lives in South-Eastern Washington, and can only put a few hours per week on this project, balancing his time between his day job and family. It took him about a year and a half, and he figures about 220 hours and $1500 to build the hull. He said he had some of the materials and epoxy, and if he accounted for everything, it would cost about $2000 - way less than the trailer or motor.
He said this about the test run: "And finally, most pleasing of all, she planed fine at half throttle. The GPS showed 11.5 mph going against a 1-2 knot current and the bow settled nicely. The motor is still in break-in phase, so I didn't go over 3000 rpms, but at that power, GPS readout was over 16 mph against that current. My most optimistic Crouch formula results gave me 19.5 mph at 1600 pounds with a 20 hp motor, and I'm thinking, once it is broken in, we will realistically hit that."
Very nice job on this build. Vic has many photos on the Wooden Boat Forum web site.
More information and access to free study prints, and links to purchase the plans for the 19' Anacapa Offshore Pacific Power Dory plans may be downloaded at: 19' Anacapa Offshore Pacific Power Dory Boat Plans.
Please don't be embarrassed to send in photos of your projects. I get a lot of emails from people who tell me about their build but never send any pictures. I'd love to see them, as would all of the other people who are either building a boat or thinking about it. They need all the encouragement they can get.
I believe in offering you all the information you need to learn more about how to build a boat. That's why I offer free videos, free ebooks, and free reports. There's even some free plans available to isiders and some seminars I've delivered. To join, just click below: